Jewellery Making Tools

Disc Cutter Set — Kite Blanks, 4 Steel Punches, 14-31 mm, for Jewellery Sheet

Kite shapes that step up in close increments — 14.69 × 23.06 mm, 16.19 × 25.4 mm, 17.69 × 27.75 mm a...

Wide-Jaw Ring Soldering Tweezers — Large, Stainless Steel, 6 Inch, 16 × 27 mm

Wide bands and heavy gents' rings tip and slide in standard tweezers just as the solder starts to fl...

Bracelet Forming Pliers — Double Cylinder, X-Large, 25 mm & 35 mm, Stainless

Rounding a bangle by eye leaves flat spots that take longer to correct than the bend took to make. T...

Chain Nose Pliers, Slim Line 120mm — Stainless Steel, Square Handles, Jewellery

Fine rotational work — easing a link open, seating a fitting, adjusting a spectacle frame — asks for...

Half Round & Flat Nose Pliers — Stainless Steel, 125mm, Ergonomic Blue & Black

Half-round one side, flat the other: the pairing that forms ring shanks, shapes loops and closes fin...

Stone Setting Prong Pusher — Square Steel Face, Wooden Handle, Jewellers' Bench

This professional prong pusher tool provides controlled force for securely closing metal claws aroun...

Chasing & Repoussé Hammer — 22mm Dome Face, Ball Peen, Wooden Handle, Metal

A chasing hammer for moving sheet metal in soft, graduated stages. The polished 22mm dome face pushe...

Bezel Closing Pliers — Grooved Jaw for Stone & Gem Setting, Stainless Steel,

A bezel closes cleanly when pressure lands evenly, all the way round. These pliers seat a machined h...

Wire-Forming Round & Concave Nose Pliers — Design Handles, Polished Stainless

Ring shanks, bails and loops come out round when the wire is supported on both faces as it bends. Th...

Flat & Cross Peen Hammer — Goldsmith & Silversmith Forming, Repoussé, Wooden

Two of the most-used hammer faces on one handle. The flat, polished circular face planishes and form...

Charm Blanking Die Set — Teddy Bear, 4 Steel Punches, 12-26 mm, Jewellery Making

For charm bracelets and playful pendant work: four teddy bear punches in graduated sizes — 12.97 × 1...

Round Bracelet Mandrel, Cast Iron Steel, with Tang — 4 Steps, 2 to 2-3/4 Inch,

Achieve consistent bangle diameters with this cast iron stepped mandrel, ideal for forming round bra...