Jewellery Making Tools

Silhouette Blank Cutter — Cameo Head Steel Punch & Die Set, 4 Punches, 9-21 mm,

The cameo head is a classic profile for pendants and earrings, and a well-behaved blank for enamelli...

Stone Setting & Repair Ring Clamp — Wooden, Wing Nut Tension, 5.5-Inch Hand Vice

Stone setting, polishing and shank work all go better with the ring held still and both hands free. ...

Anticlastic Forming Pliers, Large Cylinder — 3/8" Channel Jaw for Bracelets,

Master anticlastic forming on substantial metalwork with these large 3/8" channel pliers. Designed f...

Wire Wrapping Mandrel Pliers — Medium Triangle Jaws 7 & 9 mm, 17.15 cm,

Triangular components sized by eye rarely match; formed on a mandrel jaw they always do. The 7mm and...

Pearl & Bead Knotter — Green Knotting Tool for Consistent Jewellery Knots

Knotting between pearls is slow, exacting work when done with fingers and a needle — and one loose k...

Sand Casting Flask Rings, 2-Part Aluminium — 60mm × 60mm, for Delft Clay &

For one-off rings, small castings and teaching pieces, sand casting remains the most direct route fr...

Casting Kit for Gold & Silver — 2 kg Graphite Crucible, 34 cm Tongs, 33 cm

A three-piece kit for melting and pouring gold, silver and other non-ferrous metals — the core equip...

Parallel Action Round Nose Pliers — 200 mm (8 Inch), Smooth Jaws, PVC Grips

Parallel action changes what round nose pliers can do at the bench. Because the smooth, tapered jaws...

Flush-Trim End Cutters — 5 Inch Pliers with PVC Handles for Jewellery Wire Work

Side cutters cannot trim a wire flush when the cut sits tight against a component — the head gets in...

Fine-Point Titanium Tweezers 7-Ti — 115 mm Anti-Magnetic, Watch & Jewellery

Working close to a balance assembly, steel tweezers carry a quiet risk: one magnetised tip and small...

Loop Forming Pliers — Half Round Accu Loop 2–8 mm for Jewellery Making & Crafts

Matched loops are what separate a tidy pair of earrings from a near-miss. These pliers carry marked ...

Wire Wrapping Mandrel Set — 6 Mini Square Sizes 3-13 mm with Handle, Looping

A six-piece mandrel set for wire work with corners: square profiles in 3, 5, 6, 8, 10 and 13 mm for ...