Oval Blank Punch vs Club Blank Punch & Die Set: Which Cutter?
By Jewellery Tools UK — Hand Tools for Jewellers & Silversmiths | Published: 2026-10-31
Category: Comparisons
Compare the Oval Blank Punch and the Club Blank Punch & Die Set on shape, batch speed, and setup so you can pick the right tool for repeat blanks.
Quick answer
Choose the Oval Blank Punch if you need identical oval backplates or earring drops in batches; choose the Club Blank Punch & Die Set if you want four graduated club shapes for charm sets and mixed-size components. The trade-off is shape flexibility versus oval-specific repeatability.
Shape and size range: one oval versus four clubs
The Oval Blank Punch produces one oval shape, while the Club Blank Punch & Die Set gives you four club sizes from 13.52 × 15.1 mm up to 23.31 × 27.29 mm. If your design calls for matching ovals, the single-shape tool keeps every blank consistent; if you need a family of sizes for charm sets or pendants, the club set covers that range without changing tools.
Batch speed and setup: screw-held sheet versus mallet strike
The Oval Blank Punch uses a two-part hardened steel die block drawn together by a central hex screw, so the sheet is held flat before punching. That extra clamping step slows one-off cuts but pays off when you are cutting many ovals that must match. The Club Blank Punch & Die Set is designed for a single mallet strike per blank, which is faster for mixed sizes but relies on your sheet alignment and strike control for repeatability.
When a piercing saw still makes sense
Neither tool replaces a piercing saw for one-off or non-standard shapes. The Oval Blank Punch is markedly faster for repeated ovals, but for a single custom oval the saw remains practical. The club set suits repeated components, yet a saw is still the better choice when your design falls outside its four fixed sizes.
Trade-offs to weigh
- Shape flexibility: The club set offers four sizes but only one shape; the oval punch offers one shape but exact repeatability for ovals. If your work mixes shapes, you will still need a saw or another cutter. List your required shapes before buying; no single punch covers both ovals and clubs.
- Setup time per blank: The oval punch requires clamping the sheet with the hex screw before each punch, which adds time per blank. The club set is struck once per blank, so it is quicker for small runs of mixed sizes. For runs over a few dozen identical ovals, the clamping time is offset by consistent results.
- Material thickness and burr control: Both tools are intended for soft non-ferrous sheet such as silver, gold, copper, or brass. The oval punch's clamped die block helps hold thin sheet flat, while the club set relies on a clean mallet strike to shear without distortion. Test on scrap of the same thickness before cutting your final sheet.
Product facts
- Oval Blank Punch — Big 2-Punch Steel Disc Cutter for Metal Sheet, Jewellery Making: Hardened steel die block in two parts, drawn together by a central hex screw to hold sheet flat. The clamping action helps produce clean, burr-free oval blanks that match exactly for pendant backplates and earring drops.
Oval Blank Punch — Big 2-Punch Steel Disc Cutter for Metal Sheet, Jewellery Making - Punch & Die Set — Club Blanks, 4 Steel Punches, 13-28 mm, Jewellery Sheet Metal: Four graduated club punches from 13.52 × 15.1 mm up to 23.31 × 27.29 mm, sheared with a single mallet strike apiece. You get a size range for charm sets and repeated components without swapping dies, but each strike depends on your mallet control.
Punch & Die Set — Club Blanks, 4 Steel Punches, 13-28 mm, Jewellery Sheet Metal
Which should you choose?
Best for
- Jewellers making repeated oval pendant backplates or earring drops that must match exactly
- Bench workers who cut batches of identical ovals from soft sheet
Not for
- Makers who need multiple shapes or sizes in one session; the club set or a piercing saw is more flexible
- One-off custom ovals where a piercing saw is faster than setting up the die block
