What a Mitre Filing Jig Does for Your Bench
When a bezel or frame joint has to close without a gap, a mitre filing jig holds the stock while you file the mitre true. It replaces guesswork with a repeatable setup, so every face comes off square. For bench jewellers and silversmiths creating bezels, settings, and frames, this tool turns a fiddly hand operation into a controlled process.
This guide covers the features that matter when choosing a mitre filing jig: how it clamps, what stock profiles it accepts, and how it maintains a consistent angle across a batch.
Clamping and Stock Compatibility
Look for a jig that handles the shapes you work with most. Tube, wire, and sheet each need a different grip. A jig with V-grooves and diamond-shaped channels can seat round and square stock securely, while flat, hardened top surfaces guide your saw or file. Three knurled steel thumbscrews spread firm, even clamping pressure across the workpiece without distorting thin material.
The Mitre Filing Jig — Jeweller's Vice for Metal Tube, Wire & Sheet Cutting, with Guide Rod (Product ID: 1266697) includes these features, machined into steel jaws. It is steel throughout; a light film of oil between jobs keeps it that way. The jig accepts standard profiles a jeweller commonly encounters, though the supplied information does not specify maximum stock dimensions, so check your largest workpiece against the jaw size before buying.
Mitre Filing Jig at a Glance
- Mitre Filing Jig — Jeweller's Vice for Metal Tube, Wire & Sheet Cutting, with Guide Rod: Tube, wire and sheet seat in its V-grooves and diamond-shaped channels, and the flat, hardened top surfaces guide your saw or file so every face comes off square. You can use the same jig for multiple stock profiles without changing tooling.

Mitre Filing Jig — Jeweller's Vice for Metal Tube, Wire & Sheet Cutting, with Guide Rod - Mitre Filing Jig — Jeweller's Vice for Metal Tube, Wire & Sheet Cutting, with Guide Rod: Three knurled steel thumbscrews spread firm, even clamping pressure across the workpiece. Even pressure prevents slippage and distortion, especially on thin sheet or delicate wire.
- Mitre Filing Jig — Jeweller's Vice for Metal Tube, Wire & Sheet Cutting, with Guide Rod: Includes a separate guide rod and base to set and maintain a consistent filing angle. Repeatable angle settings save time when filing a batch of identical joints.
Angle Repeatability and the Guide Rod
If you file multiple parts that need the same mitre, a jig with a separate guide rod and base lets you set an angle once and repeat it across a whole batch. This is a clear advantage over a simple vice that requires resetting each time. The guide rod locks the filing angle, so each face comes off at the same angle as the last.
The Mitre Filing Jig includes this feature, making it suitable for production work where consistency matters. Without the guide rod, you would need to mark or measure each piece individually, which introduces variation.
Material and Maintenance
A steel jig offers durability and a stable filing surface. The Mitre Filing Jig is steel throughout, with hardened top surfaces that resist wear from saw blades and files. Maintenance is simple: a light film of oil between jobs prevents rust and keeps the thumbscrews turning smoothly.
The supplied information does not specify whether the steel is stainless or carbon, so assume it requires routine oiling in a workshop environment. If you work in a humid space or store tools for long periods, check the jig regularly for surface rust.
Who This Jig Is For
Primarily for bench jewellers and silversmiths in the UK creating bezels, settings, and frames. Also suitable for model makers and craftspeople requiring precise, repeatable angle cuts in small-profile metal stock.
If your work involves only wire or only sheet, a simpler vice might suffice. But if you switch between profiles or need repeatable mitres, a jig with V-grooves, diamond channels, and a guide rod earns its place on the bench.

