Back to Blog
How-to Guides 2026-11-16 Jewellery Tools UK — Hand Tools for Jewellers & Silversmiths 0 views

How to Use a Double Cylinder Bracelet Forming Plier

How to Use a Double Cylinder Bracelet Forming Plier

Learn how to use a double cylinder bracelet forming plier with 20 mm and 25 mm jaws to shape wire and strip into consistent bangles and cuffs.

Why a double cylinder plier makes a rounder bangle

A bangle or cuff needs the same radius all the way round. Forming that curve freehand is hard: small pressure changes produce flat spots and uneven bends that show up as soon as the bracelet is worn. A double cylinder plier solves this by giving you a fixed cylindrical jaw to bend the metal over, so every section follows the same curve.

The Bracelet Forming Pliers — Double Cylinder, Large, 20 mm & 25 mm, Stainless Steel puts two working diameters on one tool. You can form wire and flat strip into round bracelets, bangles and cuffs, and switch between the 20 mm and 25 mm cylinders when you want a tighter or more open curve.

The working parts of this plier

Forming a bangle: a repeatable bench routine

  1. Choose the cylinder: Pick the 20 mm or 25 mm jaw for the curve you want. The larger cylinder gives a more open bracelet; the smaller one gives a tighter curve. The supplied information does not specify a recommended metal thickness for each diameter, so test on a scrap piece first.
  2. Start the first bend: Place the wire or strip against the cylindrical jaw and work the metal over it. Keep the metal in contact with the jaw so the bend follows the cylinder rather than being forced by hand.
  3. Work around the curve: Continue bending in small sections, moving the metal along the jaw as you go. Because the jaw is a fixed cylinder, each new bend takes the same radius as the last.
  4. Check the curve as you go: Compare the forming bracelet against the jaw to spot any section that has not followed the cylinder. Correct it before closing the circle, when the metal is still easy to adjust.
  5. Bring the ends together: Form the final section over the same jaw so the ends meet on the same curve. The supplied information does not include a specific method for closing or soldering the ends, so follow your usual bench practice for that step.

Choosing between the 20 mm and 25 mm cylinder

The two jaws are working diameters, not a size guide for wrists. Use the 20 mm cylinder when you want a tighter, more compact curve, and the 25 mm cylinder when you want a more open bracelet or cuff. The supplied product information does not give a wrist-size conversion or a recommended strip width for either jaw, so the choice is best made by forming a test piece and checking the curve against your design.

If you already know the curve you want, the two diameters on one tool save you from switching between separate formers. If you need a different radius, this plier does not offer it — the supplied record lists only 20 mm and 25 mm.

Where this plier earns its place at the bench

  • Round bangles and cuffs: The fixed cylinders keep the curve constant around the whole piece, which is the main reason to use a forming plier rather than hand bending.
  • Wire and flat strip: The supplied record says the plier forms both wire and strip, so it can handle more than one type of bracelet blank.
  • Silversmithing and general craft: The record lists jewellery making, silversmithing and craft forming as suitable uses, so the tool is not limited to one material or project type.
  • Longer sessions: Cushioned handles are shaped for extended use, which helps when you are forming several bracelets in one sitting.

What the supplied information does not cover

The supplied record does not include a maximum metal thickness, a recommended wire gauge, or a list of metals the plier is rated for. It also does not include care instructions beyond the polished stainless-steel jaw description. Treat those as open questions and test on scrap before committing a finished piece. The plier is a forming tool, not a measuring or sizing tool, so check the final bracelet against your intended fit rather than assuming the jaw diameter equals the finished bracelet diameter.

Related Articles

Customer Service
Home
Products
Cart
Profile