Two tools, two different jobs
Hole punch pliers and disc cutters both cut sheet metal, but they answer different questions. A punch plier makes a small, fixed-size hole for a rivet, pin or finding. A disc cutter set cuts a round blank out of the sheet. Comparing them only makes sense once you separate piercing a hole from cutting a shape.
If you need a clean 1.5mm hole in silver, copper, leather or plastic, the Hole Punch Pliers are the direct tool. If you need a round disc, a disc cutter set is the right family of tool. The confusion comes from both being sold as sheet-metal cutters, so it helps to look at what each one actually leaves behind.
What the hole punch pliers actually do
- Hole Punch Pliers — 1.5mm Tool Steel Pin, Rubber Handle, Soft Metals, Plastics & Leather: Hardened 1.5mm tool steel punch pin produces clean, burr-free holes. The 1.5mm pin is the fixed size you get. That suits rivet holes and findings, not larger openings or shaped cutouts.

Hole Punch Pliers — 1.5mm Tool Steel Pin, Rubber Handle, Soft Metals, Plastics & Leather - Hole Punch Pliers — 1.5mm Tool Steel Pin, Rubber Handle, Soft Metals, Plastics & Leather: Lower jaw features a corresponding die to support the material and ensure a clean exit. The die supports the sheet as the pin exits, which is why the result is described as burr-free rather than torn.
- Hole Punch Pliers — 1.5mm Tool Steel Pin, Rubber Handle, Soft Metals, Plastics & Leather: Squeeze these pliers and the hardened 1.5mm tool steel pin drives through silver or copper sheet, leather or plastics into the die in the lower jaw, leaving a clean 1.5mm hole with a tidy exit — the same result on the fiftieth hole as the first. This describes a repeatable piercing action on soft materials, not a way to cut a disc or a large shape.
Hole punch pliers vs disc cutter set at a glance
The comparison below sticks to what each tool is for. A disc cutter set is not described in the supplied product evidence, so its capabilities are limited to the general job its name states: cutting round discs from sheet.
- Hole punch pliers: Make a fixed 1.5mm hole for rivets and findings in silver or copper sheet, leather or plastics. The pin drives into a lower-jaw die for a clean exit.
- Disc cutter set: Cut round discs from sheet metal. The tool family is for blanking a circle, not for piercing a small rivet hole.
- Best fit for a 1.5mm rivet hole: Hole punch pliers. The punch diameter is 1.5mm, matched to the hole size.
- Best fit for a round blank: Disc cutter set. A punch plier does not cut a disc.
- Burr and cleanup: The punch plier is described as leaving a burr-free hole with a tidy exit. A disc cutter's edge finish is not covered by the supplied evidence, so check the cut edge yourself.
Why a punched hole is not a drilled hole
The supplied product notes make a practical case for punching over drilling when the job is a rivet hole or a finding hole: no burr to file and no drill bit to snap. That does not make punching a universal replacement for drilling. It means that for a small, fixed hole in soft sheet, the punch plier removes two common bench annoyances.
The same notes describe the result as clean and burr-free, with the die in the lower jaw supporting the material. If your work depends on a precise hole edge for a rivet or pin, that is the relevant evidence. If you need a hole in a hardened or unfamiliar material, the supplied information does not confirm suitability, so test on scrap first.
Where the punch plier earns its place
- Rivet and finding holes: The 1.5mm punch diameter is the size to check against your rivet or finding. If that matches, the tool is aimed directly at the job.
- Soft metals: Silver and copper sheet are named as suitable materials. That is the core jewellery bench use.
- Leather and plastics: The same tool is described for leather and plastics, which is why leatherworkers and model makers also use it.
- Repetitive batches: The return spring reopens the jaws and the knurled screw stop sets punch depth, which supports consistent repeated holes.
The bench details that support repeat work
- Hole Punch Pliers — 1.5mm Tool Steel Pin, Rubber Handle, Soft Metals, Plastics & Leather: Adjustable, knurled screw stop allows for consistent punch depth and prevents damage to the tool. A depth stop is what makes the fiftieth hole resemble the first, and it protects the pin from over-travel.
- Hole Punch Pliers — 1.5mm Tool Steel Pin, Rubber Handle, Soft Metals, Plastics & Leather: Return spring between the handles automatically opens the jaws, reducing hand fatigue. On a run of rivet holes, the spring does the reopening so your hand does not have to.
- Hole Punch Pliers — 1.5mm Tool Steel Pin, Rubber Handle, Soft Metals, Plastics & Leather: Red, rubber-coated handles provide a comfortable, non-slip grip for extended use. Grip matters when you are squeezing through a batch, but it does not change the hole size.
What the comparison does not settle
The supplied evidence for the Hole Punch Pliers does not give a maximum sheet thickness, a list of hard metals it can pierce, or a recommended material preparation routine. Those are decision limits, not flaws. If your sheet is thicker than usual or you are working in a metal not named in the product notes, the honest answer is that the supplied information does not confirm the result.
The disc cutter side is even less detailed here. The supplied evidence does not describe a specific disc cutter set's sizes, cut edges or material limits. Use the general distinction: a disc cutter cuts a round blank, while the punch plier pierces a 1.5mm hole. Do not expect a disc cutter set to replace a punch plier for rivet holes, and do not expect punch pliers to cut a disc.
Checks before you choose
- Match the hole to the finding: Confirm your rivet or pin needs a 1.5mm hole. The punch plier is fixed at that diameter.
- Confirm the material: Silver, copper, leather and plastics are named. For other materials, the supplied information does not confirm suitability.
- Decide hole or disc: If you need a round blank, choose a disc cutter set. If you need a small rivet hole, choose the punch pliers.
- Plan for the unknown: Where thickness or edge finish matters and the supplied evidence is silent, test on scrap before committing a piece.

