What the chenier jig vice actually does
- What is a chenier jig vice used for?
- It holds metal tube steady so you can saw and file it to accurate, repeatable angles. That makes it useful for the joints behind tube settings, tube rivets, hinges and decorative chenier work, and it pairs naturally with bezel setting where accurate tube work matters.
- How does the jig present the tube for cutting?
- Machined V-grooves hold round tube at 45 and 90 degrees. The integrated end-stop lets you cut piece after piece to an identical length, so repeat work does not depend on marking each tube by eye.
- What holds the tube in place?
- Three knurled brass thumbscrews clamp round tube securely for filing or sawing. The block itself is solid steel, giving a stable base that will not flex under a saw stroke.
Tube Cutting & Mitring Jig Vice: the working details
- Tube Cutting & Mitring — Metal Chenier Jig Vice, Multi-Angle Filing Block, Brass Knobs: Machined V-grooves present the tube at 45 and 90 degrees. These are the two angles most mitre joints call for, so the block covers common tube-setting and hinge work without a separate setup.

Tube Cutting & Mitring — Metal Chenier Jig Vice, Multi-Angle Filing Block, Brass Knobs - Tube Cutting & Mitring — Metal Chenier Jig Vice, Multi-Angle Filing Block, Brass Knobs: The integrated end-stop allows for repeatable cuts of a consistent length. Consistent length is what makes a batch of tube rivets or settings fit together predictably.
- Tube Cutting & Mitring — Metal Chenier Jig Vice, Multi-Angle Filing Block, Brass Knobs: Three knurled brass thumbscrews securely clamp round tube for filing or sawing. Thumbscrews let you tighten and release by hand, which suits the repeated clamping of short tube sections.
- Tube Cutting & Mitring — Metal Chenier Jig Vice, Multi-Angle Filing Block, Brass Knobs: Solid steel block construction provides a stable and durable base for bench work. A base that does not flex keeps the saw stroke controlled, which matters when the cut line has to stay true.
Using the jig at the bench
- Can I file as well as saw with it?
- Yes. The supplied information describes the jig as a multi-angle filing block as well as a sawing aid, with the thumbscrews clamping tube for either filing or sawing.
- How do I keep the angles accurate over time?
- Keep the grooves clear of filings and the clamping faces clean. The supplied care guidance says this is what maintains the jig's accuracy through years of bench work.
- Is it only for round tube?
- The clamping and V-groove arrangement is described for round tube. The supplied information does not confirm use with square, oval or other tube profiles, so treat those as untested rather than assumed.
- Does it come with cutting or filing instructions?
- No operating steps are included in the supplied product information. The record confirms the angles, end-stop and clamping method, but you should rely on your own bench practice for saw choice, blade technique and filing sequence.
Where it fits in a tube-working setup
If your work involves tube settings, tube rivets or hinges, the value of this jig is repeatability: the same angle and the same length, piece after piece. That is different from a precision pin vise, which is built around holding small work for drilling and detail access rather than presenting tube at fixed mitre angles.
The trade-off is that the jig is a dedicated bench block. It earns its space when mitre joints are a regular part of your work; for occasional tube cutting, a simpler holding method may be enough. The solid steel body and brass thumbscrews are built for long bench use, provided the grooves and clamping faces are kept clean.

